Cylinder | SAM.gov Opportunity | G2X

Cylinder

SolicitationW911S226U3373Notice typeCombined Synopsis/Solicitation

Attachments

4 files

Name	Type	Posted	Actions
https://dodprocurementtoolbox.com/	LINK	Jun 4, 2026	Download
https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf	LINK	Jun 4, 2026	Download
https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml	LINK	Jun 4, 2026	Download
https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=W911S226U3373&noticeType=CombinedSynopsisSolicitation	LINK	Jun 4, 2026	Download

Version History

Cylinder

Combined SynopsisW911S226U3373Jun 15, 2026 · v2

LatestViewing

Opportunity Summary

The Department of the Army, MICC-FT Drum, has issued a combined synopsis/solicitation under solicitation number W911S226U3373 for the procurement of an industrial cylinder. This requirement is designated as a small business set-aside (SBA/SBA) under NAICS 333995, Fluid Power Cylinder and Actuator Manufacturing, and PSC 4320, Power and Hand Pumps. Responses are due by June 18, 2026. One PDF attachment detailing mounting specifications was included with the initial notice published on June 4, 2026.

The required cylinder must feature a 14.00-inch bore and a 36.00-inch stroke, with a 7-inch diameter chrome-plated rod. It must be designed for continuous duty in harsh environments, rated for 3000 PSI working pressure, and constructed using heavy-duty welded or tie-rod methods. The unit requires a front flange mounting configuration compatible with dimensional requirements on drawing C-3617. All internal components, including seals and wipers, must be compatible with phosphate ester hydraulic fluids for indoor or outdoor industrial use. The cylinder shall be non-cushioned at both ends and must allow for in-place maintenance and seal replacement without removal from the machine structure.

The vendor is responsible for providing standard hydraulic ports and ensuring the rod end features a threaded, clevis, or spherical bearing connection to be determined during design review. Each unit must undergo pressure testing to at least 1.5 times the rated working pressure prior to shipment. Deliverables include dimensional drawings, pressure ratings, fluid compatibility statements, and test certifications upon request. Performance requirements mandate that both the rod and cap sides be rated for full pressure without leakage or permanent deformation.

Generated by Lumen AI

Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.

Opportunity Summary

Opportunity Details

Response deadline: Jun 18, 20263 days remaining
NAICS: 333995 (opens in new tab)
PSC: 4320 (opens in new tab)
Set aside: SBA
Published: Jun 4, 2026
Updated: Jun 15, 2026
Agency: DEPT OF THE ARMY (opens in new tab)
Office: W6QM MICC-FT DRUM
Department: —
Source: View on SAM.gov (opens in new tab)

Contact and place of performance

Point of contact: —

Place of performance: 47522

Original Description

Updated for rewording of description to add the cylinder mount details. Also added the attachment showing the mount details. Cylinder size Cylinder shall have a 14.00 inch bore and 36.00 inch stroke.Rod size Cylinder rod shall be 7 inch diameter, chrome plated over the full exposed length.Mounting configuration Cylinder shall be provided with a front flange mounting arrangement suitable for rigid attachment to the machine structure, with flange dimensions and bolt pattern per manufacturers standard for a 14 inch bore industrial cylinder.Mounting shall comply with dimensional requirements shown on DWG C-3617.Cylinder shall include the required attachment features for the specified front flange mount.Operating pressure rating Cylinder shall be designed and rated for continuous operation at 3000 PSI working pressure, with an appropriate safety factor per industry standards such as NFPA or ISO.Hydraulic fluid compatibility All seals, wipers, and internal elastomeric components shall be fully compatible with phosphate ester hydraulic fluids and suitable for continuous service in that medium.Cushioning Cylinder shall be non cushioned at both ends of stroke. No internal adjustable cushions are required.Construction type Cylinder shall be of heavy duty welded or tie rod industrial construction, designed for continuous duty in harsh environments including industrial, defense, or heavy equipment applications.Rod finish and protection Rod shall be induction hardened or equivalent as required by vendor to support the 7 inch diameter design. Chrome plating shall provide corrosion and wear resistance suitable for outdoor or industrial use.Ports and connections Cylinder shall be provided with standard hydraulic ports sized appropriately for 3000 PSI operation and the expected flow rate. Port type such as SAE, NPTF, or metric shall be specified by the vendor and compatible with the existing hydraulic system.End configurations Cap end Front flange mounting as specified.Rod end Rod end shall be provided with a threaded, clevis, or spherical bearing connection as required by the application. Final configuration to be determined during design review.Sealing system Primary rod seal, secondary seal, and wiper shall be designed for high pressure, high cycle service at 3000 PSI. All seals shall be phosphate ester compatible and rated for the full operating temperature range of the system.Operating environment Cylinder shall be suitable for indoor or outdoor industrial use, including exposure to dust, moisture, and typical shop contaminants.Performance requirements Cylinder shall be capable of full stroke operation at 3000 PSI without permanent deformation or leakage. Rod side and cap side shall both be rated for full pressure.Testing and quality Each cylinder shall be pressure tested to at least 1.5 times rated working pressure or per vendor standard prior to shipment. Cylinder shall be free of external leakage and shall meet vendors internal leakage criteria.Maintenance and serviceability Cylinder design shall allow seal replacement, gland removal, and rod service using standard shop tools. All routine rebuild and seal replacement operations shall be possible without removing the cylinder from the machine. The design shall provide sufficient access for in place servicing while the cylinder remains installed in its mounting configuration.DocumentationVendor shall provideDimensional drawing showing overall length, flange to rod end dimensions, stroke, and mounting details.Pressure rating, fluid compatibility statement for phosphate ester fluids, and test certification upon request.