Contact and place of performance
Danielle Mallory
Norfolk, VA 23511
USA
Pursuant to the authority at FAR 12.603(c)(2): (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Please identify the Country of Origin for the it...
View more(v) Line items are detailed as follows:
LINE ITEM: 001
DESCRIPTION: ENGINEERING HELM CHAIRS
EXTENDED DESCRIPTION: WIDTH (EDGE-TO-EDGE): THE OUTSIDE DIAMETER ACROSS
THE ARMRESTS 23.5", HEIGHT RANGE (DECK TO TOP OF CUSHION): LOWERED: 26", RAISED: 34" BACKREST DEPTH (CUSHION EDGE TO BACK OF HEADREST): UPRIGHT: 27.05" FULLY RECLINED: 37.56 INCHES. PEDESTAL TUBE HEIGHT: THE HEIGHT OF THE POWDERCOATED
PEDESTAL TUBE IS 17.4" FROM THE DECK. BOLT PATTERN AND HARDWARE: CIRCULAR 6-BOLT PATTERN BOLT TYPE: 5/16-18 X .750" SOCKET FLAT HEAD STAINLESS STEEL BOLTS. STANDARD FOLDING FOOTREST ASSEMBLY. FULL 360-DEGREE ROTATION WITH LOCKING DETENTS EVERY 45 DEGREES BACKREST RECLINES 40 DEGREES FROM THE UPRIGHT POSITION. FORE/AFT TRAVEL: THE SEAT SLIDE ALLOWS FOR 8" OF FORWARD/BACKWARD MOVEMENT. CHAIREOOW"
-CHAIR 2: RED EMBROIDERY- "SPACE SUP"
-CHAIR 3: RED EMBROIDERY-"CHENG"
-CHAIR 4: YELLOW EMBROIDERY- "EOOW"
-CHAIR 5: YELLOW EMBROIDERY-"SPACE SUP"
-CHAIR 6: YELLOW EMBROIDERY-"CHENG"
QTY: 6
UNIT OF ISSUE: EA
LINE ITEM: 002
DESCRIPTION: PILOT HOUSE AND BRIDGE WING HELM CHAIRS
EXTENDED DESCRIPTION: CHAIR SIZING: WIDTH 27.5", HEIGHT 72" FULLY RECLINE 34.5"
RECLINE FROM SEATED POSITION: 25 DEGREES ROTATE 360 DEGREES AND RECLINE FROM SEATED POSITION 25 DEGREES FOR FULL BRIDGE FUNCTIONALITY CHAIRCHAIR SIZING: WIDTH FROM EDGE TO EDGE OF ARM REST
OUTSIDE DIAMETER OF 23.60". MUST HAVE EDGE OF SEAT CUSHION TO BACK OF HEAD REST 27.03" (UPRIGHT) TO 35.56" (FULLY RECLINED); HEIGHT FROM THE DECK TO TOP OF HEAD REST OR TOTAL HEIGHT 61.99" (LOWERED POSITION) TO 69.99" (FULLY EXTENDED). SEAT HEIGHT
FROM TOP OF THE SEAT CUSHION TO THE BASE BOTTOM OR DECK 32.44" (LOWERED) TO 40.44” (FULLY RAISED). THE POWDER COATED PEDESTAL TUBE HEIGHT IS 22.40" FROM THE DECK. MUST MEET CIRCULAR EIGHT BOLT PATTERN ACCEPTING 5/16-18 X .750" SOCKET FLAT HEAD STAINLESS STEEL BOLTS. FULLY RECLINE 35.56" RECLINE FROM SEATED POSITION: 25 DEGREES
ROTATE 360 DEGREES AND RECLINE FROM SEATED POSITION 25 DEGREES FOR FULL FUNCTIONALITY CHAIR1
UNIT OF ISSUE: EA
LINE ITEM: 004
DESCRIPTION: FLIGHT DECK CONTROL HELM CHAIR
EXTENDED DESCRIPTION: WIDTH FROM EDGE TO EDGE OF ARM REST OUTSIDE
DIAMETER OF 23.55". MUST HAVE EDGE OF SEAT CUSHION TO BACK OF HEAD REST 27.05" (UPRIGHT) TO 37.56" (FULLY RECLINED); HEIGHT FROM THE DECK TO TOP OF HEAD REST 56.99" (LOWERED POSITION) TO 64.99" (FULLY EXTENDED). SEAT HEIGHT FROM TOP OF THE SEAT CUSHION TO THE BASE BOTTOM OR DECK 27.15" (LOWERED) TO 36.15" (FULLY RAISED). THE POWDER COATED PEDESTAL TUBE HEIGHT IS 17.4" FROM THE DECK.MUST MEET CIRCULAR EIGHT BOLT PATTERN ACCEPTING 5/16-18 X .750" SOCKET FLAT HEAD STAINLESS STEEL BOLTS RETRACTABLE FOOTREST ASSEMBLY ROTATE 360 DEGREES AND RECLINE 25 DEGREES FROM SEATED POSITION FOR FULL FLIGHT DECK FUNCTIONALITY CHAIR1
UNIT OF ISSUE: EA
(vi) This requirement is for thirteen (13) helm chairs.
(vii) The required delivery date (RDD) is: 01 July 2026. The DELIVERY ADDRESS is 1968 Morris Street, Bldg Y109, Norfolk, VA 23511. FOB Destination will be used.
(viii) The provision at FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition and is included in the attached "Clauses and Provisions", Attachment 1.
(ix) The provision at FAR 52.212-2, Evaluation - Commercial Items will be used and is included as Attachment 1. The vendor’s proposed price will be evaluated on the basis of price reasonableness in accordance with FAR 13.106.
(xi) The clause at FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition and is included as Attachment 1.
(xiii) All clauses and provisions applicable to this requirement are included in the attached "Clauses and Provisions", Attachment 1. “Clauses and Provisions to be signed”,
(xiv) The Defense Priorities and Allocations System (DPAS) rating does not apply to this acquisition.
(xv) All quotes are due by the date and time specified in this posting and shall be submitted via email to the POC email address stated in this posting.
(xvi) The individual to contact for information regarding this solicitation is stated in the posting.
ATTACHMENTS:
The NAVSUP Fleet Logistics Center Norfolk, on behalf of the Department of the Navy, is issuing this combined synopsis/solicitation to procure helm chairs for delivery to Norfolk, Virginia. This acquisition, identified under solicitation number N0018926QL112, is a request for quotation (RFQ) for the establishment of a firm-fixed-price purchase order for supplies. The requirement is categorized under NAICS code 337127 Institutional Furniture Manufacturing and PSC 7195 Miscellaneous Furniture and Fixtures. There is no set-aside designated for this requirement.
The scope of work involves the delivery of 12 chairs across two primary line items. The first line item consists of six engineering helm chairs with specific dimensions including a 23.5-inch width and adjustable heights ranging from 26 to 34 inches. These units feature powder-coated pedestals, 360-degree rotation with locking detents, and custom embroidery for roles such as "EOOW," "SPACE SUP," and "CHENG" in red and yellow. The second line item includes six pilot house and bridge wing helm chairs with 27.5-inch widths and total heights reaching up to 72 inches. These chairs must meet specific circular eight-bolt patterns and feature retractable footrest assemblies and 25-degree recline capabilities.
Quotations are due by June 2, 2026, and must be submitted via email to Danielle Mallory. Respondents are required to identify the country of origin for the items, and payment will be processed through a Government Purchase Card. Evaluation will be conducted based on price reasonableness in accordance with FAR 13.106. The solicitation includes two attachments: Attachment 2 Description of Requirement.pdf and Attachment 1 Clauses and Provisions.pdf, both published on May 28, 2026.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.